|
|
|
|
|
|
Initially designed for the building refurbishment market, Mass 50 is
now established as a market-leading product with a multitude of uses throughout the building and civil engineering
industries. In common with all Mabey Support Systems' products, the Mass 50 System has been developed
by our in-house engineering team to give maximum flexibility from a set of off-the-shelf components.
The Mass 50 prop unit has a 250mm square cross-section and is capable of supporting loads of up to 500kN on a single leg.
The units have been designed to provide the high load capacities and low frame deflections demanded by today's construction
industry. Bracing and accessories are easily bolted to the webs and/or flanges of the Prop units. Fully drilled, web-stiffened
grillage beam assemblies are provided to spread higher loads into supports.
|
 |
|
Mass 50 can be built into trusses and towers from standard parts, a range of truss and frame braces
are available as part of the system to form stiff trusses and towers from standard off-the-shelf components.
|
Adjustable end units are available for fine adjustment of both raking and vertical props. Mass 50 can
be used in conjunction with the Hymat Hydraulic Jack to facilitate pre-loading
and jacking applications.
|
|
|
|
|
|
